Saturday, January 2, 2016

Custom domain for Azure Web Apps using FreeDNS

The below steps go through setting up a custom domain name on your Azure Web App, using the FreeDNS service from NameCheap. Both the www subdomain www.yourdomainhere.com and the naked yourdomainhere.com will be setup.

I have an Azure S1 Small Instance App Service Plan on which I'm running 4 web apps. Originally I had planned to use Azure DNS, to keep everything within the same cloud service, but after some initial attempts formed the opinion that Azure DNS isn't mature enough yet to host production web sites. Azure DNS can currently only be administered from within Azure Powershell - that in itself was enough to put me off using it. If you need to make a quick change to a DNS record, you don't want to be having to run Powershell to do it. Microsoft are working on adding Azure DNS to the Azure Portal, but at the moment it's not available.

I have a couple of domains through NameCheap and for those and a couple of others (with CrazyDomains) I decided to use NameCheap's DNS service.  Even when your domain is not registered through NameCheap, they still offer a free DNS service, called FreeDNS.

Note that in the below steps, yourwebappname and yourdomainhere.com should of course be replaced with your specific names.


Step 1. Reduce the TTLs to 5 minutes

Note: you only need to perform this step if you're porting from an existing DNS provider. No need to do this if you're setting up a new web app on a new domain.

Within your current DNS service, setup all the TTL settings (Time To Live) on the DNS records to the minimum (typically 300 seconds, or 5 minutes). This may help in having the DNS changes propagate faster.

After this is done, try to get a full DNS zone file listing. When you port the DNS records to FreeDNS it will help ensure that you don't miss anything. My previous VPS and DNS provider was Linode and I was porting a few web apps from Linode over to Azure web apps.


Step 2. Ensure your Azure web app is running

Ensure your web app is published and running ok at http://yourwebappname.azurewebsites.net


Step 3. Find the IPv4 address of your Azure web app

From a windows cmd.exe prompt ...

C:\> nslookup yourwebappname.azurewebsites.net

Server:  UnKnown
Address:  192.168.1.1

Non-authoritative answer:
Name:    waws-prod-xxx-xxx.cloudapp.net
Address:  1.2.3.4
Aliases: 
yourwebappname.azurewebsites.net
          waws-prod-xxx-xxx.vip.azurewebsites.windows.net


The nslookup command will provide you with your web app's IPv4 address. This is shown in the second Address field above, e.g. 1.2.3.4. I am running an Azure S1 Small Instance App Service Plan. I believe this method still applies to other plans including shared instance plans.

Note that if your web app is restarted or stopped this may result in it being assigned a different IP address. Be aware of this when using naked domain URLs (without the www prefix) since these rely on the A record being configured for the correct IP address of your web app (as per step 6).


Step 4. Setup FreeDNS

On the NameCheap FreeDNS page, enter yourdomainhere.com and click 'Get DNS'. If its eligible, then click 'Add to Cart', then click 'Set up DNS'.

You get this message from NameCheap :-

N.B. don't go ahead and set the nameservers just yet, that step will come later.

    yourdomainhere.com
    Congratulations! Your domain/ sub-domain is added to our DNS service.
    Please set the nameservers of your domain/ sub-domain to

        freedns1.registrar-servers.com
        freedns2.registrar-servers.com
        freedns3.registrar-servers.com
        freedns4.registrar-servers.com
        freedns5.registrar-servers.com

    Our system will periodically monitor your domain's DNS setting and will activate your domain once it is pointing to our servers.

   

Step 5. Verify ownership of your domain

In NameCheap, on the Domain List page, once the yourdomainhere.com is listed as active, then need to click on "Authorize DNS" link...

Select the required email, such as admin@yourdomainhere.com to use as the auth email.

On the domain page, the redirect domain setting will show "Your FreeDNS domain is waiting for Authorization or Verification by domain owner."

In the received email, click on the embedded hyperlink and then on the webpage, click the "I AUTHORIZE" hyperlink.

A message should display "Host has been successfully activated".


Step 6. Setup the FreeDNS records

At this step you'll setup all of the DNS records for your domain.
For all of these I left them with the default TTL setting of 'Automatic'.
In NameCheap, on the Domain List page, click the MANAGE button next to your domain, then click on the Advanced DNS tab.

In the Host records, add the A record with the IP that was returned in step 3.

Type  Host  Value            TTL
A     @     1.2.3.4          Automatic


Add any required TXT records (often used for verification).

Add the 3 CNAME records required to verify ownership of the domain to Azure.

1. Set HOST to awverify
    Set Target to awverify.yourwebappname.azurewebsites.net

2. Set HOST to awverify.www
    Set Target to awverify.yourwebappname.azurewebsites.net

3. Set HOST to www
    Set Target to yourwebappname.azurewebsites.net
  
If required, set the mail setting to Custom MX and add the MX server records...
For example if you have Gmail enabled on the domain you'd use these MX records...

Set Mail to Custom MX

Host        Type Priority      Mail server name
@            MX     20         ALT1.ASPMX.L.GOOGLE.COM.
@            MX     10         ASPMX.L.GOOGLE.COM.
@            MX     20         ALT2.ASPMX.L.GOOGLE.COM.
@            MX     30         ASPMX2.GOOGLEMAIL.COM.
@            MX     30         ASPMX3.GOOGLEMAIL.COM.

  
  
Step 7. Change the DNS nameservers using your registrar

For the case when your registrar is not NameCheap, you'll need to point the nameservers for the domain to the FreeDNS nameservers.

Log into your registrar's website and set the following nameservers, removing the existing nameservers if required ...

        freedns1.registrar-servers.com
        freedns2.registrar-servers.com
        freedns3.registrar-servers.com
        freedns4.registrar-servers.com
        freedns5.registrar-servers.com



Step 8. Wait for the DNS nameserver change to propagate

You can check whether the changes have propagated yet using nslookup from the windows command line ...

C:\> nslookup yourdomainhere.com
C:\> nslookup www.
yourdomainhere.com
C:\> nslookup awverify.
yourdomainhere.com
C:\> nslookup awverify.www.
yourdomainhere.com

Use nslookup in interactive mode for MX and TXT record lookups ...


C:\> nslookup

set q=mx

yourdomainhere.com

set q=txt

yourdomainhere.com

exit


Or you can also use these great online tools for checking the DNS propagation ...

    http://www.whatsmydns.net
    https://www.ultratools.com/tools/dnsLookup

Or on Linux I believe the command is: dig yourdomainhere.com

   
Step 9. Bring the domains into your web app using the Azure Portal

In the Azure portal, go to yourwebappname Web App -> Settings -> Custom Domains and SSL -> Bring External Domains

Enter yourdomainhere.com into the field, and then press tab. Wait for it to verify your CNAME records.

In the next field, enter www.yourdomainhere.com and press tab again. Wait for it to verify your CNAME records.

It should succeed as you tab out of each field, and after you click the save button at the top, it should report "Updating hostname bindings".


Step 10. Test in a browser

Open both www.yourdomainhere.com and yourdomainhere.com in a browser and confirm that they load ok.

Turn on the browser's web developer tools (Network tab) to check that all the components of the web app are loading with HTTP 200 OK status, and are resolving to the new IP address.

Its normal to experience some issues for the first several hours after changing nameservers, for example you may see the domain resolve to the old name server settings or flipping back and forth from new to old. Usually this will settle down after a few hours. It can be caused by the browser caching DNS results, something I've noticed particularly bad in Firefox sometimes. You may also need to flush the DNS cache on the computer you are using.


Flush the DNS cache in windows via:

C:\> ipconfig /flushdns


Other references ...

There is some additional Azure related information in the below post about this subject:
https://azure.microsoft.com/en-us/documentation/articles/web-sites-custom-domain-name/



Follow @dodgy_coder


Subscribe to posts via RSS